General
HAMMER
Horizontalne mešalnice krmil
HAMMER
Horizontal feed mixers with the HAMMER line mill enable quality milling and mixing of various grains and vitamin supplements. They differ from vertical mixers by their more compact design, as the mill and hopper are mounted directly on the storage tank. They operate using only two motors. The input components of the feed are milled directly into the storage tank. In the storage tank, with the help of a mixing auger, the inserted mass is lifted. Mixing is carried out by lifting the mass from the bottom to the top of the mixing auger and letting it fall back freely, lasting from eight to ten minutes. Emptying of the mixer takes place with manual release. During mixing, mineral and vitamin supplements can be added through a designated opening.
-
LMP-500
| Model | LMP-500 |
|---|---|
| Height (cm) | 200 |
| Capacity (kg/l) | 500 / 700 |
| Engine power (kW) | 10.0 |
| Width (cm) | 100 |
| Length (cm) | 270 |
| Preparation time full capacity (min) | 30 |
| Weight (kg) | 420 |
Height (cm)
Capacity (kg/l)
Engine power (kW)
Width (cm)
Length (cm)
Preparation time full capacity (min)
Weight (kg)
|
Model
Height (cm)
200
|
Model
Capacity (kg/l)
500 / 700
|
Model
Engine power (kW)
10.0
|
Model
Width (cm)
100
|
Model
Length (cm)
270
|
Model
Preparation time full capacity (min)
30
|
Model
Weight (kg)
420
|
LMP 500
The LMP-500 feed mixer is designed for fast and efficient feed preparation, enabling the mixing of 500–700 kg of material in approximately 30 minutes. It is powered by a robust 10 kW motor, ensuring reliable performance even under higher loads. With its compact dimensions — 2.0 m in height, 1.0 m in width, and 2.7 m in length — it fits easily into various production environments. The sturdy construction with a total weight of 420 kg provides excellent stability and long service life.
Slovenski
Deutsch
Croatian